Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the gear shift cable of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024

Today's guide will show us the main steps that will allow us to disassemble and replace the gear cable of the Fiat 500. First, we open the hood of the car and begin to locate the gear cable located at the bottom; then we disconnect the cable from the register and then from the gear lever, using a key to unscrew the screw of the register, as shown in the video. At this point, we replace the cable along with the sheath, installing the new one; then we adjust the cable and if necessary the clutch cable, following the video tutorial until the end!

Posted on 29 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust or Replace the Gear Cable on the Fiat 500
How to Adjust or Replace the Gear Cable on the Fiat 500
Fiat 500 (2007-2024 / 312) This guide briefly outlines the instructions to adjust or replace the gear cable on the Fiat 500. First, open the vehicle's bonnet and locate the cab…
How to repair the front folding seat of the Fiat 500
How to repair the front folding seat of the Fiat 500
Fiat 500 (2007-2024 / 312) The instructions in this guide will show us how to repair the front folding seat of the Fiat 500. First, we open the front door of the car and start …
Replacement of the gear knob of the Fiat 500L
Replacement of the gear knob of the Fiat 500L
Fiat 500 (2012-2023 / 500 L) Below we will see information on how to disassemble and replace the gear knob of the Fiat 500L. First, we get into the car and start by removing the …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - Where is the USB port fuse located on a Fiat 500? Read answer
    • 500 2007-2024 - What happens when the "uconnect" on Fiat 500 expires? Read answer
    • 500 2007-2024 - Where is the jack on the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos