Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust or Replace the Gear Cable on the Fiat 500

Model: Fiat 500 312 - Years 2007-2024

This guide briefly outlines the instructions to adjust or replace the gear cable on the Fiat 500. First, open the vehicle's bonnet and locate the cable connected to the gearbox that allows gear engagement; it consists of an adjuster that allows you to tighten or loosen the gear cable by unscrewing or loosening the lock nut, as shown in the video. To replace the gear cable, it will be necessary to detach it at both ends, removing it along with the sheath, following the video tutorial to the end!

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the gear shift cable of the Fiat 500
Replacement of the gear shift cable of the Fiat 500
Fiat 500 (2007-2024 / 312) Today's guide will show us the main steps that will allow us to disassemble and replace the gear cable of the Fiat 500. First, we open the hood of th…
How to Replace the Gear Knob on a Fiat 500
How to Replace the Gear Knob on a Fiat 500
Fiat 500 (2007-2021 / 312) Before you begin, sit in the driver's seat of your Fiat 500. Start by prising off the top cover of the gear knob using a flat screwdriver. Next, unsc…
How to Replace the Gear Knob on a Fiat 500
How to Replace the Gear Knob on a Fiat 500
Fiat 500 (2007-2024 / 312) Want to replace the gear knob on your Fiat 500? Learn how to do it in this video. First, remove the plastic cover on the knob with a screwdriver, the…

    Frequently Asked Questions

    • 500 2007-2022 - Where is the USB port fuse located on a Fiat 500? Read answer
    • 500 2007-2024 - What happens when the "uconnect" on Fiat 500 expires? Read answer
    • 500 2007-2024 - Where is the jack on the Fiat 500? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos