Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the airbag of the 2012 Fiat Estrada

Model: Fiat Fiat Various
Part: Airbag

Removing the steering wheel airbag of the 2012 Fiat Estrada follows simple and quick steps to be carried out independently. We begin the removal process by disconnecting the car's battery, this operation is essential to prevent the airbag from activating. We continue the procedure by inserting a Phillips head screwdriver inside the steering wheel, in order to activate the internal levers and remove the protection system. Once this operation has been carried out on all the rear side holes of the steering wheel, we extract the system and disconnect the connector. Once the airbag has been removed, we can carry out the necessary maintenance operations.

Posted on 1 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Activate and Deactivate the Airbag on Fiat Cars
How to Activate and Deactivate the Airbag on Fiat Cars
Fiat Fiat Various Before learning how to manually deactivate and reactivate the passenger airbag in some older Fiat models, remember that this operation should only be…
How to Remove the Engine from a Fiat Dino
How to Remove the Engine from a Fiat Dino
Fiat Fiat Various This guide provides the main instructions for disassembling and removing the engine from the body of the Fiat Dino. First, lift the vehicle and start…
How to Reset the Seatbelt System on a Fiat Linea
How to Reset the Seatbelt System on a Fiat Linea
Fiat Fiat Various If you need to perform maintenance on one or more seatbelts in your Fiat Linea and want to temporarily disable the alarm system, simply follow these …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos