Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Rear Wiper Rubber Refill

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Windshield wipers

To save costs, instead of replacing the entire rear wiper, you can change just the rubber refill. Obtain the rubber refill for the rear wiper. The operation is simple; take the rubber from the upper side and pull it completely out of the support, applying force until it comes out of its seat. Cut the new refill slightly longer than the length of the arm. Now take the new refill by one end and carefully insert it into the rear wiper rail, starting from the top down to the base. Cut off any excess. Check that the rubber is securely in place by operating the wiper.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Wiper on Fiat Grande Punto
Replacing the Rear Wiper on Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Start with the rear wiper: lift the arm to its limit, bend the blade away from the arm, and press the clip that holds it in place. Remove the blade f…
How to Remove the Rear Boot Panel in a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This short video will show you how to remove the boot trim panel in a Fiat Punto or a Fiat Punto Evo. This operation is quite easy and quick and may …
Replacing the Cabin Filter
Replacing the Cabin Filter
Fiat Punto (1999-2011 / MK 2, 188) Replacing the cabin filter in your car is very important as it protects against external agents entering the cabin. It is advisable to replace it eve…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos