Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Service warning light

The service light reset must be performed on a Fiat Punto vehicle after completing car maintenance operations such as fluid and filter replacement, timing belt and engine check. To perform the reset, we need to turn on the instrument panel and press the TRIP button located on the outer part of the right steering wheel lever. Display the kilometers and press the OK and Call buttons to access the service menu, from which we will then select the "ASSYST PLUS", "FULL SERVICE" and finally "RESET" options. We conclude the reset of the light by turning off the instrument panel and then turning it on again.

Posted on 8 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In order to reset the Service light that appears on the instrument panel of the Fiat Punto, you will need to connect a diagnostic tool to the OBD por…
How to Reset the Service Light on the Fiat Punto?
How to Reset the Service Light on the Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To reset the Service light on the Fiat Punto, you will need a diagnostic tool, as there is no procedure that can be completed via the onboard compute…
How to reset the service light on the Fiat Punto
How to reset the service light on the Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) To reset the service light on a Fiat Punto produced from 1993 to 1999, we need to: - turn on the vehicle's instrument panel; - press the button to re…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - How do I reset the expired service warning light on my Fiat Grande Punto? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos