Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Interior Lights of the Fiat Freemont

Model: Fiat Freemont MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

Video tutorial

This video shows how to change the rear interior lights of the Fiat Freemont, namely the rear lights and reverse light. You will need a 7 mm spanner and a plastic trim tool.

The light is removed from the inside, so open the boot. On the side you are working on, remove the so-called "Parker bolts"; there are two on each side.

Once these are removed, close the bonnet and, using the plastic trim tool to lever from underneath the light, remove the light unit. Inside, there are two buttons holding it in place, but they will be easy to remove.

Then disconnect the electrical connector by twisting it, and the bulb will come out.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on the Fiat Freemont - Dodge Journey
How to Replace the Rear Brake Pads on the Fiat Freemont - Dodge Journey
Fiat Freemont (2011-2016 / MK 1) In this video, learn how to remove and replace the rear brake pads, as well as the front ones, on the Fiat Freemont and Dodge Journey. First, lift th…
Where are the fuses located in the Fiat Freemont?
Where are the fuses located in the Fiat Freemont?
Fiat Freemont (2011-2016 / MK 1) The fuses in the Fiat Freemont are divided within the specific fuse boxes installed in the vehicle. This model has two fuse boxes: the first is locat…
Where are the Fuses on the Fiat Freemont?
Where are the Fuses on the Fiat Freemont?
Fiat Freemont (2011-2016 / MK 1) The fuses on the Fiat Freemont are divided within the dedicated fuse boxes located in the vehicle. This vehicle has two fuse boxes: the first is loca…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos