Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear brake pads of the Fiat Freemont - Dodge Journey

Model: Fiat Freemont MK 1 - Years 2011-2016
Part: Brake pads

Let's see in this video how to remove and replace the rear brake pads, but also the front ones, of the Fiat Freemont and the Dodge Journey. First we lift the car and start by removing the rear wheel; after which we unscrew the fixing screws of the brake caliper to remove it, in order to subsequently extract the brake pads, as shown in the video. At this point we clean the caliper from the residual dirt; we leverage the caliper piston and then insert the new brake pads, applying the reverse procedure!


Posted on 24 April 2024 by ScegliAuto



Removal of the rear light Fiat Freemont - Dodge Journey
Fiat Freemont (2011-2016 / MK 1) .. remove the rear light on a Fiat Freemont and on a Dodge Journey, following these simple instructions. First we go to open the tailgate of the trunk and..
How to replace the rear seat belts on the Fiat Freemont - Dodge Journey
Fiat Freemont (2011-2016 / MK 1) .. seat belts of the Fiat Freemont, but also of the Dodge Journey. First we open the tailgate and begin by reclining the rear seats; after which we remove..
How to remove the front door of the Fiat Freemont - Dodge Journey
Fiat Freemont (2011-2016 / MK 1) .. the front door on the Fiat Freemont and on the Dodge Journey, following the instructions below. First we open the front door and start by unscrewing..

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos