Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the External Mirror Cap of the Fiat 500 Abarth

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Side mirror

See other generations:
Video tutorial

Below are the main instructions for removing and replacing the external mirror cap of the Fiat 500 Abarth. First, move to the outside of the vehicle and start by prising off the mirror glass to detach and remove it, disconnecting the small electrical connector located at the back; then, pry off the sides of the plastic cap to detach and remove it, as shown in the video.

At this point, install the new mirror cap, ensuring that the clips are in good condition; finally, refit the glass!


Updated on 18 October 2026 by ScegliAuto


Related tutorials

Fiat 500 (2007-2022 / ) To replace the cap of the external wing mirror on the Fiat 500 Abarth, use a tool like a screwdriver to pry out the glass from its housing. Once the …
Fiat 500 (2007-2021 / ) To replace the outer wing mirror cap on a Fiat 500, use a tool to lever in the groove that separates the upper cap from the lower support of the mirr…
Fiat 500 (2007-2021 / 312) Before you begin, exit the cabin of your Fiat 500 and head to the wing mirror. Start by prying off and removing the glass from the side mirror. Next,…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos