Do it yourself
| ||||
|
Fiat 500 - Video tutorial
Model: Fiat 500
- Years 2007-2022 In order to replace the outer mirror cap on the Fiat 500 Abarth, you need to use an object like a screwdriver to pry and remove the mirror glass from its housing. Once the glass is removed, you can unscrew the screws that secure the cap from inside the mirror, completely removing it from the outside. After the old cap is removed, you can insert the new one, securing it with the internal screws; after installation, you can reinsert the mirror glass.
Posted on 21 September 2023 by ScegliAuto
|
Frequently Asked QuestionsHandbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |