Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the rearview mirror with camera on the Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2024
Part: Rearview mirror

Today's main instructions will show us how to install the rearview mirror with rear camera on the Fiat 500 Abarth. First, we get on board the car and start by removing the original rearview mirror, taking off the plastic clip located at the back; to install the mirror with rear camera, it will be necessary to first install the camera on the trunk door and then pass the wiring from there to the mirror (passing it behind the plastic pillars), following the video tutorial until the end!

Posted on 18 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the outer rearview mirror cap of the Fiat 500 Abarth
Replacement of the outer rearview mirror cap of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Below are the main instructions that will allow us to disassemble and replace the outer cover of the rearview mirror of the Fiat 500 Abarth. First, l…
How to Install the Reversing Camera in a Fiat 500?
How to Install the Reversing Camera in a Fiat 500?
Fiat 500 (2007-2024 / 312) To install the reversing camera in a Fiat 500, you need to completely remove the internal trim of the tailgate: once it is removed, you can position …
How to disassemble the internal rearview mirror of the Fiat 500
How to disassemble the internal rearview mirror of the Fiat 500
Fiat 500 (2007-2024 / 312) If the rearview mirror inside the cabin of your new Fiat 500 is broken or you simply want to replace it with a new one, but you don't know how to do …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos