Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. C Max
  6. : Hydraulic pistons

Ford C Max - Hydraulic pistons

Ford C Max (2003-2010 / MK 1)
Replace the springs on a Ford C-Max tailgate

Gas springs of our car to be replaced? How do they disassemble and how do they reassemble? Let's see in this video how to replace the springs on a Ford C-Max …read all…
Posted on 9 October 2023 by ScegliAuto

Cigarette Lighter (1) Airbags (2) Alternator (6) Loudspeaker (1) Shock absorbers (1) Car stereo (12) Roof Rack Bars (1) Battery (17) Key (24) Timing belt (8) -board computer (5) Checks and maintenance (35) Bearing (1) Brake discs (2) Headlight (7) Tail light (4) Fog lights (1) Air filter (2) Cabin air filter (8) Diesel filter (2) Oil filter (1) Hand brake (1) Injectors (1) Accessory Kit (2) Light bulb (2) Side turn signal light bulb (2) Headlight bulb (18) Rear light bulb (6) Handle (1) Engine oil (5) Door panel (6) Front bumper (3) Rear bumper (3) Brake pads (1) Hydraulic pistons (1) Tires (1) Gear Shift Knob (2) Door (1) Instrument cluster (12) Cockpit heating cock (1) Fuse box (21) Seat (6) Parking sensors (1) Lock (2) Suspensions (2) Outside rearview mirror (4) Windscreen wipers (2) Thermostat (1) Interior blower (1)

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos