Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. C Max
    4. : Front bumper

Ford C Max - Front bumper

Ford C Max (2010-2019 / MK 2)
How to mount the front bumper of a Ford C-Max
Before we begin, we will need to open the front hood of our Ford C-Max. So let's start by placing the front bumper in its housing. After that, we will need to …read all…
Posted on 10 February 2024 by ScegliAuto
Ford C Max (2010-2019 / MK 2)
Ford C Max rear bumper removal
Remove the rear bumper of the Ford C Max? We open the tailgate and remove the rear wheels to work in comfort (we use a jack). We unscrew the tightening screws …read all…
Posted on 14 December 2023 by ScegliAuto
Ford C Max (2010-2019 / MK 2)
Front Bumper Repair
Have you damaged your cover and would it cost too much to replace it? Well this is the guide for you! First disassemble and remove the bumper from the car, …read all…
Posted on 18 September 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (2) Alternator (6) Loudspeaker (1) Shock absorbers (1) Car stereo (12) Roof Rack Bars (1) Battery (17) Key (24) Timing belt (8) -board computer (5) Checks and maintenance (35) Bearing (1) Brake discs (2) Headlight (7) Tail light (4) Fog lights (1) Air filter (2) Cabin air filter (8) Diesel filter (2) Oil filter (1) Hand brake (1) Injectors (1) Accessory Kit (2) Light bulb (2) Side turn signal light bulb (2) Headlight bulb (18) Rear light bulb (6) Handle (1) Engine oil (5) Door panel (6) Front bumper (3) Rear bumper (3) Brake pads (1) Hydraulic pistons (1) Tires (1) Gear Shift Knob (2) Door (1) Instrument cluster (12) Cockpit heating cock (1) Fuse box (21) Seat (6) Parking sensors (1) Lock (2) Suspensions (2) Outside rearview mirror (4) Windscreen wipers (2) Thermostat (1) Interior blower (1)

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos