Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Bumper of Ford C Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

Removing the rear bumper of the Ford C Max? Open the tailgate and remove the rear wheels for easier access (use a jack). Unscrew the securing screws located inside the wheel arch liners.

Once the screws in the liners are removed, unscrew the screws underneath and above the bumper. Remove the bumper from the body of the vehicle after unscrewing all screws.

To proceed with the refitting, hold the bumper against the body of the vehicle and tighten all screws around the wheel arch liners and around the perimeter of the bumper. Refit the wheels and lower the jack.

Refit the rear lights.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of the Ford C-Max
How to Remove the Rear Bumper of the Ford C-Max
Ford C Max (2003-2010 / MK 1) Below are the instructions that will allow you to remove and replace the rear bumper of the Ford C-Max, following these simple steps. First, move to …
Removing the Rear Bumper of a Ford C-Max
Removing the Rear Bumper of a Ford C-Max
Ford C Max (2003-2010 / MK 1) Let's remove the rear bumper of a Ford C-Max. Follow these steps carefully. This operation is not too complex if done in an orderly manner. First, us…
How to Remove the Rear Bumper from a Ford C-Max
How to Remove the Rear Bumper from a Ford C-Max
Ford C Max (2010-2019 / MK 2) Start by opening the rear boot. Once done, proceed to unscrew all the screws located on the lower side of the bumper of your C-Max. Next, repeat this…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos