Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of the Ford C-Max

Model: Ford C Max MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Rear bumper

See other generations:
Video tutorial

Below are the instructions that will allow you to remove and replace the rear bumper of the Ford C-Max, following these simple steps. First, move to the rear and open the boot; then unscrew the fixing screws located above the bumper and on both sides of the rear wheel arches, unclip the bumper from the sides until it is completely removed, as shown in the video.

At this point, replace and install the new rear bumper, securing it correctly on the sides with the original screws, applying the reverse procedure!


Updated on 12 September 2026 by ScegliAuto


Related tutorials

How to Fit the Front Bumper on a Ford C-Max
How to Fit the Front Bumper on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Before starting, open the bonnet of your Ford C-Max. Begin by positioning the front bumper in its housing. Next, secure the rear fastening clips. Onc…
How to Remove the Rear Bumper from a Ford C-Max
How to Remove the Rear Bumper from a Ford C-Max
Ford C Max (2010-2019 / MK 2) Start by opening the rear boot. Once done, proceed to unscrew all the screws located on the lower side of the bumper of your C-Max. Next, repeat this…
Removing the Rear Bumper of a Ford C-Max
Removing the Rear Bumper of a Ford C-Max
Ford C Max (2003-2010 / MK 1) Let's remove the rear bumper of a Ford C-Max. Follow these steps carefully. This operation is not too complex if done in an orderly manner. First, us…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos