Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. C Max
    4. : Rear bumper

Ford C Max - Rear bumper

Ford C Max (2003-2010 / MK 1)
How to disassemble the rear bumper of the Ford C-Max.
Below we will see the instructions that will allow us to disassemble and replace the rear bumper of the Ford C-Max, following these simple steps. First, let's …read all…
Posted on 10 February 2024 by ScegliAuto
Ford C Max (2010-2019 / MK 2)
How to remove the rear bumper of a Ford C Max
Let's start by opening the rear trunk. Once this is done, we will proceed with unscrewing all the screws placed on the lower side of the bumper of our C Max. …read all…
Posted on 27 February 2024 by ScegliAuto
Ford C Max (2003-2010 / MK 1)
We remove the rear bumper of a Ford C-max
We remove the rear bumper of a Ford C-max. Let's see together how to proceed with the various steps. Operation not too complex if you proceed in order. First, …read all…
Posted on 9 October 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (2) Alternator (6) Loudspeaker (1) Shock absorbers (1) Car stereo (12) Roof Rack Bars (1) Battery (17) Key (24) Timing belt (8) -board computer (5) Checks and maintenance (35) Bearing (1) Brake discs (2) Headlight (7) Tail light (4) Fog lights (1) Air filter (2) Cabin air filter (8) Diesel filter (2) Oil filter (1) Hand brake (1) Injectors (1) Accessory Kit (2) Light bulb (2) Side turn signal light bulb (2) Headlight bulb (18) Rear light bulb (6) Handle (1) Engine oil (5) Door panel (6) Front bumper (3) Rear bumper (3) Brake pads (1) Hydraulic pistons (1) Tires (1) Gear Shift Knob (2) Door (1) Instrument cluster (12) Cockpit heating cock (1) Fuse box (21) Seat (6) Parking sensors (1) Lock (2) Suspensions (2) Outside rearview mirror (4) Windscreen wipers (2) Thermostat (1) Interior blower (1)

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos