Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper of a Ford C-Max

Model: Ford C Max MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Rear bumper

See other generations:
Video tutorial

Let's remove the rear bumper of a Ford C-Max. Follow these steps carefully. This operation is not too complex if done in an orderly manner.

First, using a screwdriver or battery-powered drill, unscrew the fastening screws located at the top of the bumper. Next, remove the screws located at the sides of the wheel arch liners.

Finally, use a lever to detach the fastening clips located at the bottom of the bumper (between the black plastic cover and the bumper). Once the bumper is free from any screws or pins, grasp it with your hands and pull it away from the bodywork (disconnect any power cables if present).


Updated on 27 February 2026 by ScegliAuto


Related tutorials

Removing Rear Bumper of Ford C Max
Removing Rear Bumper of Ford C Max
Ford C Max (2010-2019 / MK 2) Removing the rear bumper of the Ford C Max? Open the tailgate and remove the rear wheels for easier access (use a jack). Unscrew the securing screws …
How to Remove the Rear Bumper of the Ford C-Max
How to Remove the Rear Bumper of the Ford C-Max
Ford C Max (2003-2010 / MK 1) Below are the instructions that will allow you to remove and replace the rear bumper of the Ford C-Max, following these simple steps. First, move to …
How to Fit the Front Bumper on a Ford C-Max
How to Fit the Front Bumper on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Before starting, open the bonnet of your Ford C-Max. Begin by positioning the front bumper in its housing. Next, secure the rear fastening clips. Onc…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos