Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Front Bumper on a Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Front bumper

Before starting, open the bonnet of your Ford C-Max. Begin by positioning the front bumper in its housing. Next, secure the rear fastening clips. Once done, screw in all the fastening screws in the holes around the entire outer perimeter of the bumper. This will secure the front bumper in place. Proceed to fit the various covers and external clips. Once this step is complete, you will have finished fitting the front bumper on your Ford C-Max.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Ford C-Max
How to Replace the Front Headlight Bulb on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Before starting, open the front bonnet of your Ford C-Max. Begin by unscrewing and removing the bolts that secure the headlamp to the car. Then, extr…
Where is the OBD Port on the Ford C Max 2011?
Ford C Max (2010-2019 / MK 2) If you want to connect a diagnostic tool to your Ford C Max second generation (2011) but do not know where the OBD port is located, do not worry as t…
Replacing the Gas Struts on a Ford C-Max Boot
Replacing the Gas Struts on a Ford C-Max Boot
Ford C Max (2003-2010 / MK 1) Need to replace the gas struts on your car? How to remove and reinstall them? In this video, we will see how to replace the struts on a Ford C-Max bo…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos