Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Ford C-Max

Model: Ford C Max MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight bulb

See other generations:
Video tutorial

Before starting, open the bonnet of your Ford C-Max. Begin by unscrewing and removing the screws that secure the front headlamp to the frame. Next, pull and lift the front lamp, then unclip and remove the rear cover of the bulb.

This will give you access to the blown bulb, which you can then pull out from its housing. At this point, disconnect the electrical connector, and the disassembly will be complete.

To install the new bulb, follow these steps in reverse, and you will have finished the replacement.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of a Ford C-Max?
How to Replace the Front Headlight Bulb of a Ford C-Max?
Ford C Max (2010-2019 / MK 2) To replace the front headlight bulb of a Ford C-Max, open the bonnet to access the screws that secure the headlight from the top. Once these screws a…
How to replace the front headlight bulb of the Ford C Max
How to replace the front headlight bulb of the Ford C Max
Ford C Max (2010-2019 / MK 2) Today we will explain how to replace the front headlight on the second generation Ford C Max. Using a Torx key, T30, we unscrew the screws located on…
How to Replace the Front Light Bulb on the Ford C-Max?
How to Replace the Front Light Bulb on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) To replace the front light bulb on the Ford C-Max, open the bonnet to access the top of the light: here you will find the screws to loosen, which wil…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos