Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. C Max
  6. : Shift knob

Ford C Max - Shift knob

Shift Knob Ford C Max (2003-2010 / mk 1)

Ford C Max (2003-2010 / MK 1)
How to Remove the Gear Knob on Ford C Max

How to remove the knob on the Ford C Max? Let's see how to disassemble the knob and gaiter. Use a plastic lever to disconnect the gaiter frame, take the knob …Read all…
Posted on 15 May 2026 by ScegliAuto
Ford C Max (2003-2010 / MK 1)
How to Remove the Gear Knob on Ford C Max

Want to replace the manual gear knob on your Ford C Max? Here’s how to proceed: use a plastic lever to detach the leather gaiter frame; lift it up and …Read all…
Posted on 26 March 2026 by ScegliAuto

Cigarette lighter (1) Airbag (3) Alternator (6) Speaker (1) Shocks (1) Car stereo (11) Roof rack bars (1) Battery (20) Transmission (1) Body (5) Key (35) Trunk lock (1) Timing belt (11) Onboard computer (4) Checks and maintenance (14) Bearing (1) Brake rotors (2) Headlight (12) Tail light (5) Fog lights (1) Air filter (2) Cabin air filter (10) Diesel fuel filter (2) Oil filter (2) Parking brake (2) Fuel injectors (2) Accessory kit (2) Light bulb (3) Side marker bulb (2) Headlight bulb (21) Tail light bulb (7) Handle (1) Engine oil (2) Clock (5) Door trim panel (10) Front bumper (3) Rear bumper (3) Brake pads (1) Hydraulic pistons (1) Shift knob (2) Car door (1) Instrument cluster (7) Heater core (1) Heater control valve (1) Fuse box (33) Seat (7) Parking sensors (1) Door lock (2) Suspension system (2) Side mirror (6) Rearview mirror (1) Warning light – error code (12) (13) Tire pressure warning light (7) Service warning light (43) Manufacturer emblem (1) Windshield wipers (3) Thermostat (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos