Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gear Knob on Ford C Max

Model: Ford C Max MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Shift knob

See other generations:
Video tutorial

How to remove the knob on the Ford C Max? Let's see how to disassemble the knob and gaiter. Use a plastic lever to disconnect the gaiter frame, take the knob in your hands and rotate it to the left until you remove it from the gear stick (remove the gaiter if it needs replacing).

Disassemble the fastening plastics of the knob if they are damaged. Secure the gaiter to the fastening plastic, then take the new knob and slide it onto the stick present on the centre tunnel, tightening it onto the stick.

Finally, test the correct assembly of all parts of the gear kit.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to Remove the Gear Knob on Ford C Max
How to Remove the Gear Knob on Ford C Max
Ford C Max (2003-2010 / MK 1) Want to replace the manual gear knob on your Ford C Max? Here’s how to proceed: use a plastic lever to detach the leather gaiter frame; lift it up an…
How to Replace the Key Battery on a Ford C-Max
How to Replace the Key Battery on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Start by inserting the tip of a thin but sturdy tool into the slot on the top side of the key fob for your Ford C-Max, then lever it open. Next, dise…
How to Unlock the Automatic Gearbox in the Ford C-Max?
How to Unlock the Automatic Gearbox in the Ford C-Max?
Ford C Max (2010-2019 / MK 2) In this tutorial, see how to unlock the automatic gearbox in the Ford C-Max, a procedure to perform in case of emergency, for example, to move the ve…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos