Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gear Knob on Ford C Max

Model: Ford C Max MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Shift knob

See other generations:
Video tutorial

Want to replace the manual gear knob on your Ford C Max? Here’s how to proceed: use a plastic lever to detach the leather gaiter frame; lift it up and disconnect the knob from the gear lever (remove the plastic that secures the knob to the lever). For reassembly: fit the new leather gaiter with the clips, then take the new knob and slide it onto the lever in the centre console.

Tighten the new knob until it is fully secured. Finally, test the correct installation of the knob by moving the lever on the centre console.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Remove the Gear Knob on Ford C Max
How to Remove the Gear Knob on Ford C Max
Ford C Max (2003-2010 / MK 1) How to remove the knob on the Ford C Max? Let's see how to disassemble the knob and gaiter. Use a plastic lever to disconnect the gaiter frame, take …
How to Unlock the Automatic Gearbox in the Ford C-Max?
How to Unlock the Automatic Gearbox in the Ford C-Max?
Ford C Max (2010-2019 / MK 2) In this tutorial, see how to unlock the automatic gearbox in the Ford C-Max, a procedure to perform in case of emergency, for example, to move the ve…
How to Remove the Radio from a Ford C Max
How to Remove the Radio from a Ford C Max
Ford C Max (2003-2010 / MK 1) Removing the radio from a Ford C Max to install a new one? This is not too complicated; here's how to do it. Insert the keys into the slots at the co…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos