Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. C Max
    4. : Suspensions

Ford C Max - Suspensions

Ford C Max (2003-2010 / MK 1)
Replacing the rear shock absorbers of the Ford C-Max 1
In this guide, let's find out how to disassemble and replace the shock absorbers or rear suspension of the first series Ford C-Max, in simple and quick steps. …read all…
Posted on 28 November 2022 by ScegliAuto
Ford C Max (2003-2010 / MK 1)
How to replace the suspension of the Ford C Max
As a first operation you will have to remove some parts that cover the bolt that blocks the upper part of the suspension, obviously it will be necessary to …read all…
Posted on 30 September 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (2) Alternator (6) Loudspeaker (1) Shock absorbers (1) Car stereo (12) Roof Rack Bars (1) Battery (17) Key (24) Timing belt (8) -board computer (5) Checks and maintenance (35) Bearing (1) Brake discs (2) Headlight (7) Tail light (4) Fog lights (1) Air filter (2) Cabin air filter (8) Diesel filter (2) Oil filter (1) Hand brake (1) Injectors (1) Accessory Kit (2) Light bulb (2) Side turn signal light bulb (2) Headlight bulb (18) Rear light bulb (6) Handle (1) Engine oil (5) Door panel (6) Front bumper (3) Rear bumper (3) Brake pads (1) Hydraulic pistons (1) Tires (1) Gear Shift Knob (2) Door (1) Instrument cluster (12) Cockpit heating cock (1) Fuse box (21) Seat (6) Parking sensors (1) Lock (2) Suspensions (2) Outside rearview mirror (4) Windscreen wipers (2) Thermostat (1) Interior blower (1)

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos