Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ranger
    4. : Cabin air filter

Ford Ranger - Cabin air filter

Cabin Air Filter Ford Ranger (2011-2023 / t 6, p 375, px)

Ford Ranger (2011-2023 / T6, P375, PX)
How to replace the cabin air filter of a Ford Ranger?
To replace the cabin air filter on a Ford Ranger, you need to locate the compartment where it is located, which is situated under the front glove box. To …Read all…
Posted on 10 September 2024 by ScegliAuto
Ford Ranger (2011-2023 / T6, P375, PX)
How to Replace the Cabin Filter in a Ford Ranger Pickup?
In this tutorial, you will see how to replace the cabin filter in a Ford Ranger pickup, a very simple and quick operation. First, go to the passenger side, …Read all…
Posted on 8 August 2026 by ScegliAuto
Airbag (1) Car stereo (1) Battery (5) Transmission (1) Control unit (1) Key (18) Trunk lock (1) Onboard computer (2) Checks and maintenance (13) Dashboard (2) Side marker light (1) Headlight (3) Tail light (2) Air filter (3) Cabin air filter (2) Fuel filter (1) Diesel fuel filter (2) Oil filter (3) Clutch (1) Grille (2) Side marker bulb (1) Headlight bulb (3) Tail light bulb (3) Interior dome light bulb (1) Handle (3) Trim cover (3) Starter motor (1) Clock (2) Door trim panel (4) Front bumper (1) Shift knob (2) Fuel pump (1) Power window switch (1) Heater control valve (2) Wheel (6) Fuse box (28) Door lock (1) Side mirror (2) AdBlue warning light (13) Warning light – error code (12) (6) Service warning light (59) Windshield wipers (1) EGR valve (2) Blower motor (2) Side window (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos