Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ranger
    4. : Blower motor

Ford Ranger - Blower motor

Blower Motor Ford Ranger (1993-1997 / mk 2)

Ford Ranger (1993-1997 / MK 2)
Replacing the Cabin Fan Resistor
First, open the front bonnet. The cabin fan is located on the left side (when facing the engine) just below the windscreen, behind the windscreen washer …Read all…
Posted on 7 February 2026 by ScegliAuto
Ford Ranger (1993-1997 / MK 2)
Replacing the Cabin Fan
Open the front bonnet and ensure it is securely supported. To remove the cabin fan, it is necessary to detach the coolant and windscreen washer fluid …Read all…
Posted on 6 February 2026 by ScegliAuto
Airbag (1) Car stereo (1) Battery (6) Transmission (1) Control unit (1) Key (18) Trunk lock (1) Onboard computer (2) Checks and maintenance (13) Dashboard (2) Side marker light (1) Headlight (3) Tail light (2) Air filter (3) Cabin air filter (2) Fuel filter (1) Diesel fuel filter (2) Oil filter (3) Clutch (1) Grille (2) Side marker bulb (1) Headlight bulb (3) Tail light bulb (3) Interior dome light bulb (1) Handle (3) Trim cover (3) Starter motor (1) Clock (2) Door trim panel (4) Front bumper (1) Shift knob (2) Fuel pump (1) Power window switch (1) Heater control valve (2) Wheel (7) Fuse box (30) Door lock (1) Side mirror (2) AdBlue warning light (13) Warning light – error code (12) Tire pressure warning light (6) Service warning light (61) Windshield wipers (1) EGR valve (2) Blower motor (2) Side window (3)

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos