Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ranger
    4. : Headlight

Ford Ranger - Headlight

Headlight Ford Ranger (2011-2023 / t 6, p 375, px)

Ford Ranger (2011-2023 / T6, P375, PX)
How to Install Updated LED Headlights on a Ford Ranger
The first thing to do is ensure that the headlights you are purchasing are approved for road use in the country where you intend to use them, after which you …Read all…
Posted on 10 August 2026 by ScegliAuto
Ford Ranger (2006-2011 / )
How to Replace the Front Headlight Bulb on Ford Ranger
Lift the bonnet, secure it, and remove the plastic cover by unscrewing the screws. Then, pull the two levers now exposed, and as you will see, the headlamp …Read all…
Posted on 18 May 2026 by ScegliAuto
Ford Ranger (1993-1997 / MK 2)
Instructions for Replacing the Front Headlight
First, open the bonnet and ensure it is securely supported. To detach the lamp holder, access between the headlight and the slam panel: pull out the lamp …Read all…
Posted on 7 February 2026 by ScegliAuto

Headlight Ford Ranger (2006-2011 / )

Ford Ranger (2011-2023 / T6, P375, PX)
How to Install Updated LED Headlights on a Ford Ranger
The first thing to do is ensure that the headlights you are purchasing are approved for road use in the country where you intend to use them, after which you …Read all…
Posted on 10 August 2026 by ScegliAuto
Ford Ranger (2006-2011 / )
How to Replace the Front Headlight Bulb on Ford Ranger
Lift the bonnet, secure it, and remove the plastic cover by unscrewing the screws. Then, pull the two levers now exposed, and as you will see, the headlamp …Read all…
Posted on 18 May 2026 by ScegliAuto
Ford Ranger (1993-1997 / MK 2)
Instructions for Replacing the Front Headlight
First, open the bonnet and ensure it is securely supported. To detach the lamp holder, access between the headlight and the slam panel: pull out the lamp …Read all…
Posted on 7 February 2026 by ScegliAuto

Headlight Ford Ranger (1993-1997 / mk 2)

Ford Ranger (2011-2023 / T6, P375, PX)
How to Install Updated LED Headlights on a Ford Ranger
The first thing to do is ensure that the headlights you are purchasing are approved for road use in the country where you intend to use them, after which you …Read all…
Posted on 10 August 2026 by ScegliAuto
Ford Ranger (2006-2011 / )
How to Replace the Front Headlight Bulb on Ford Ranger
Lift the bonnet, secure it, and remove the plastic cover by unscrewing the screws. Then, pull the two levers now exposed, and as you will see, the headlamp …Read all…
Posted on 18 May 2026 by ScegliAuto
Ford Ranger (1993-1997 / MK 2)
Instructions for Replacing the Front Headlight
First, open the bonnet and ensure it is securely supported. To detach the lamp holder, access between the headlight and the slam panel: pull out the lamp …Read all…
Posted on 7 February 2026 by ScegliAuto
Airbag (1) Car stereo (1) Battery (5) Transmission (1) Control unit (1) Key (18) Trunk lock (1) Onboard computer (2) Checks and maintenance (13) Dashboard (2) Side marker light (1) Headlight (3) Tail light (2) Air filter (3) Cabin air filter (2) Fuel filter (1) Diesel fuel filter (2) Oil filter (3) Clutch (1) Grille (2) Side marker bulb (1) Headlight bulb (3) Tail light bulb (3) Interior dome light bulb (1) Handle (3) Trim cover (3) Starter motor (1) Clock (2) Door trim panel (4) Front bumper (1) Shift knob (2) Fuel pump (1) Power window switch (1) Heater control valve (2) Wheel (6) Fuse box (28) Door lock (1) Side mirror (2) AdBlue warning light (13) Warning light – error code (12) (6) Service warning light (59) Windshield wipers (1) EGR valve (2) Blower motor (2) Side window (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos