Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ranger
    4. : Handle

Ford Ranger - Handle

Handle Ford Ranger (2011-2023 / t 6, p 375, px)

Ford Ranger (2011-2023 / T6, P375, PX)
How to Replace the Internal Handle of a Ford Ranger
See how to replace the front handle of a Ford Ranger; this is a common issue as the internal handle is attached to a fragile plastic support. Start with a trim …Read all…
Posted on 23 August 2026 by ScegliAuto
Ford Ranger (1993-1997 / MK 2)
Replacement of External Door Handle
This tutorial shows how to repair, install, modify, or replace an external door handle on a Ford Ranger. Start by removing the cover of the internal window …Read all…
Posted on 7 February 2026 by ScegliAuto
Ford Ranger (1993-1997 / MK 2)
Repairing the Rear Door Handle
Remove the screws securing the rear door trim panel and take off the metal plate to access the handle. Lubricate the handle's mounting pins before unscrewing …Read all…
Posted on 6 February 2026 by ScegliAuto

Handle Ford Ranger (1993-1997 / mk 2)

Ford Ranger (2011-2023 / T6, P375, PX)
How to Replace the Internal Handle of a Ford Ranger
See how to replace the front handle of a Ford Ranger; this is a common issue as the internal handle is attached to a fragile plastic support. Start with a trim …Read all…
Posted on 23 August 2026 by ScegliAuto
Ford Ranger (1993-1997 / MK 2)
Replacement of External Door Handle
This tutorial shows how to repair, install, modify, or replace an external door handle on a Ford Ranger. Start by removing the cover of the internal window …Read all…
Posted on 7 February 2026 by ScegliAuto
Ford Ranger (1993-1997 / MK 2)
Repairing the Rear Door Handle
Remove the screws securing the rear door trim panel and take off the metal plate to access the handle. Lubricate the handle's mounting pins before unscrewing …Read all…
Posted on 6 February 2026 by ScegliAuto
Airbag (1) Car stereo (1) Battery (5) Transmission (1) Control unit (1) Key (18) Trunk lock (1) Onboard computer (2) Checks and maintenance (13) Dashboard (2) Side marker light (1) Headlight (3) Tail light (2) Air filter (3) Cabin air filter (2) Fuel filter (1) Diesel fuel filter (2) Oil filter (3) Clutch (1) Grille (2) Side marker bulb (1) Headlight bulb (3) Tail light bulb (3) Interior dome light bulb (1) Handle (3) Trim cover (3) Starter motor (1) Clock (2) Door trim panel (4) Front bumper (1) Shift knob (2) Fuel pump (1) Power window switch (1) Heater control valve (2) Wheel (6) Fuse box (28) Door lock (1) Side mirror (2) AdBlue warning light (13) Warning light – error code (12) (6) Service warning light (59) Windshield wipers (1) EGR valve (2) Blower motor (2) Side window (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos