Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ranger
    4. : Oil filter

Ford Ranger - Oil filter

Oil Filter Ford Ranger (2011-2023 / t 6, p 375, px)

Ford Ranger (2011-2023 / T6, P375, PX)
How to Replace the Engine Oil and Oil Filter in a Ford Ranger 2.2L
This guide briefly outlines the instructions for replacing the engine oil and oil filter in a Ford Ranger 2.2L. First, lift the vehicle and begin draining the …Read all…
Posted on 30 August 2026 by ScegliAuto
Ford Ranger (2011-2023 / T6, P375, PX)
How to Replace the Oil Filter on the Ford Ranger?
To replace the oil filter on the Ford Ranger, access the wheel arch of the front right wheel: here, at the upper central part of the wheel arch, you will find …Read all…
Posted on 6 November 2026 by ScegliAuto
Ford Ranger (2011-2023 / T6, P375, PX)
Where is the oil filter located on the Ford Ranger pick-up?
In this video, you can see where the oil filter is located on the Ford Ranger pick-up and how to proceed if you need to replace it. This operation should be …Read all…
Posted on 10 August 2026 by ScegliAuto
Airbag (1) Car stereo (1) Battery (6) Transmission (1) Control unit (1) Key (18) Trunk lock (1) Onboard computer (2) Checks and maintenance (13) Dashboard (2) Side marker light (1) Headlight (3) Tail light (2) Air filter (3) Cabin air filter (2) Fuel filter (1) Diesel fuel filter (2) Oil filter (3) Clutch (1) Grille (2) Side marker bulb (1) Headlight bulb (3) Tail light bulb (3) Interior dome light bulb (1) Handle (3) Trim cover (3) Starter motor (1) Clock (2) Door trim panel (4) Front bumper (1) Shift knob (2) Fuel pump (1) Power window switch (1) Heater control valve (2) Wheel (7) Fuse box (30) Door lock (1) Side mirror (2) AdBlue warning light (13) Warning light – error code (12) Tire pressure warning light (6) Service warning light (61) Windshield wipers (1) EGR valve (2) Blower motor (2) Side window (3)

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos