Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the oil filter located on the Ford Ranger pick-up?

Model: Ford Ranger T6, P375, PX - Years 2011-2023
Part: Oil filter

In this video, you can see where the oil filter is located on the Ford Ranger pick-up and how to proceed if you need to replace it. This operation should be carried out alongside the oil change. As shown, the filter is located on the right side of the engine, approximately halfway up, and you can access it by raising the front of the vehicle and removing both the wheel and the wheel arch liner. Before loosening the housing with a 27mm spanner, you must drain all the oil contained in the engine through the drain plug located on the underside.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter on a Ford Ranger Pickup?
How to Replace the Fuel Filter on a Ford Ranger Pickup?
Ford Ranger (2011-2023 / T6, P375, PX) In this tutorial, you will see how to replace the fuel filter on a Ford Ranger pickup, a very simple and quick operation. First, ensure that the engi…
How to reset the oil service on a Ford Ranger pick-up?
How to reset the oil service on a Ford Ranger pick-up?
Ford Ranger (2011-2023 / T6, P375, PX) As shown in this tutorial, resetting the oil service on a Ford Ranger pick-up is a very simple and quick operation. Before proceeding, ensure that al…
How to reset the oil service on a Ford Ranger?
How to reset the oil service on a Ford Ranger?
Ford Ranger (2011-2023 / T6, P375, PX) In this tutorial, you will learn how to reset the oil service on a Ford Ranger, a very simple and quick operation to perform after completing all req…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos