Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Updated LED Headlights on a Ford Ranger

Model: Ford Ranger T6, P375, PX - Years 2011-2023
Part: Headlight

The first thing to do is ensure that the headlights you are purchasing are approved for road use in the country where you intend to use them, after which you can proceed with the replacement: Disconnect the battery, unscrew the screws that secure the grille and detach it from the central panel; remove the clips that secure the front bumper to the body, unscrew the 8 mm screw inside each wheel arch that secures the bumper to the wing, unscrew the screws under the bumper, and gently pull the bumper forward. Now remove the original headlight, which is secured by three fastening elements: one top button screw, one Torx on the side, and one 10 mm bolt at the bottom. Extract the headlight and disconnect all the electrical connectors at the back: take a photo before unplugging them! Remove the headlight and fit the new one complete with all its bulbs, reconnect the electrical connectors, insert it into its housing, and secure it with all its fastenings. Repeat the procedure on the other side. Reassemble everything in reverse order, but first, perform a functionality test.

Posted on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses on a Ford Ranger?
Ford Ranger (1983-1992 / MK 1) The exact location of the fuses on a Ford Ranger is shown in the vehicle's owner's manual. However, since this model is quite old, it is likely that …
Where is the fuse box of the Ford Ranger located?
Where is the fuse box of the Ford Ranger located?
Ford Ranger (1993-1997 / MK 2) To find the fuse box inside your Ford Ranger, you must follow the steps described in this new mini guide dedicated to you. First of all, you must ope…
How to reset the service light on the Ford Ranger
How to reset the service light on the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) For the manual reset of the service light on the display of the instrument panel of your Ford Ranger, you do not necessarily need to seek the help of…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos