Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front bumper grille of the Ford Ranger

Model: Ford Ranger RA, P703 - Years: 2022, 2023, 2024, 2025, 2026
Part: Grille

See other generations:
Video tutorial

In this short guide we will see the instructions that will allow us to disassemble and replace the front bumper grille of the Ford Ranger. First, we open the vehicle's hood and start removing all the plastic clips above the grille, removing the covers; then we unscrew the two fixing screws with a 10 mm key, releasing the grille until it is completely removed, as shown in the video.

At this point we install the new front bumper grille, fixing it correctly; we install all the plastic covers located on the top part!


Posted on 13 August 2025 by ScegliAuto


Related tutorials

Removing the Front Bumper of a Ford Ranger
Removing the Front Bumper of a Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) Today, see how to remove the front bumper of a Ford Ranger. Start by opening the bonnet and removing the plastic cover by first taking out its retain…
How to Access the Spare Wheel of a Ford Ranger/Raptor
How to Access the Spare Wheel of a Ford Ranger/Raptor
Ford Ranger (2022-2026 / RA, P703) Let's see how to access the spare wheel of the Ford Ranger/Raptor: the operation is divided into two main phases. Lower the spare wheel and lift the …
How do you replace the battery in the Ford Ranger remote control?
How do you replace the battery in the Ford Ranger remote control?
Ford Ranger (2011-2023 / T6, P375, PX) To replace the battery of the Ford Ranger remote control, you need to press the button located on the top of the device, so that the key can be remov…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos