Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Front Grille and Chrome Trim

Model: Ford Ranger MK 2 - Years: 1993, 1994, 1995, 1996, 1997
Part: Grille

See other generations:
Video tutorial

Open the front bonnet, unscrew the fixing screws along the edge of the grille and remove the front mask (grille). Proceed to remove the indicator light and headlamp to also take off the chrome trim.

Then apply the new trim and reassemble the indicator light and headlamp. Repeat the same process on the other wing and finally refit the new chrome grille.

Many chrome accessories such as trims, profiles, scuff plates, and covers for external mirrors and handles are available in the aftermarket.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Replacement of the front bumper grille of the Ford Ranger
Replacement of the front bumper grille of the Ford Ranger
Ford Ranger (2022-2026 / RA, P703) In this short guide we will see the instructions that will allow us to disassemble and replace the front bumper grille of the Ford Ranger. First, we …
Replacing the Cabin Fan
Replacing the Cabin Fan
Ford Ranger (1993-1997 / MK 2) Open the front bonnet and ensure it is securely supported. To remove the cabin fan, it is necessary to detach the coolant and windscreen washer fluid…
How to Locate the Fuses in a Ford Ranger
How to Locate the Fuses in a Ford Ranger
Ford Ranger (1998-2011 / MK 3) To locate the fuses in a Ford Ranger, check the main electrical system boxes. The interior fuse box is located under the dashboard on the driver's si…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos