Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Fan

Model: Ford Ranger MK 2 - Years: 1993, 1994, 1995, 1996, 1997
Part: Blower motor

See other generations:
Video tutorial

Open the front bonnet and ensure it is securely supported. To remove the cabin fan, it is necessary to detach the coolant and windscreen washer fluid reservoirs.

Disconnect the connector attached to the fan motor and unscrew the mounting nuts of the fan to extract it. Then fit the fan onto the shaft of the new motor and reverse the installation process (the flat part of the mounting flange should face downwards): tighten the mounting nuts, reconnect the fan motor connector, and reattach the reservoirs.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Fan Resistor
Replacing the Cabin Fan Resistor
Ford Ranger (1993-1997 / MK 2) First, open the front bonnet. The cabin fan is located on the left side (when facing the engine) just below the windscreen, behind the windscreen was…
How to Replace the Cabin Air Filter on a Ford Ranger?
How to Replace the Cabin Air Filter on a Ford Ranger?
Ford Ranger (2011-2023 / T6, P375, PX) To replace the cabin air filter on a Ford Ranger, locate the compartment where it is situated, which is under the front glove box. Start by opening t…
Removing the Interior Light Fitting on a Ford Ranger T6-T7
Removing the Interior Light Fitting on a Ford Ranger T6-T7
Ford Ranger (2015-2019 / ) In this video, we will see how to remove the interior light fittings and replace the bulbs on a Ford Ranger T6 and T7 in simple and quick steps. Firs…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos