Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Interior Light Fitting on a Ford Ranger T6-T7

Model: Ford Ranger - Years 2015-2019
Part: Interior dome light bulb

In this video, we will see how to remove the interior light fittings and replace the bulbs on a Ford Ranger T6 and T7 in simple and quick steps. First, get inside the vehicle and remove the front light fitting; to do this, lever off the sides and remove the central bulb and the side bulbs, replacing them with new ones of the correct type. Now you can reattach the front light fitting and move on to the rear one; once the rear fitting is removed, replace the bulb just like you did for the front, using the same type of bulb!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob on the Ford Ranger
How to Replace the Gear Knob on the Ford Ranger
Ford Ranger (1998-2011 / MK 3) If the gear knob in your Ford Ranger (1998-2011) is worn out and you want to know the steps to replace it yourself, read this guide and follow the pr…
Where Are the Fuses on a Ford Ranger?
Ford Ranger (1983-1992 / MK 1) The exact location of the fuses on a Ford Ranger is shown in the vehicle's owner's manual. However, since this model is quite old, it is likely that …
How to Replace the Rear Light on Ford Ranger
How to Replace the Rear Light on Ford Ranger
Ford Ranger (2015-2019 / ) Let's see how to replace the rear light on the Ford Ranger. To remove the light, unscrew the securing screws. Use a socket or screwdriver to unscrew …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos