Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of a Ford Ranger

Model: Ford Ranger T6, P375, PX - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Front bumper

See other generations:
Video tutorial

Today, see how to remove the front bumper of a Ford Ranger. Start by opening the bonnet and removing the plastic cover by first taking out its retaining clips.

Then, using a 10mm socket, unscrew the bolts holding the grille in place and remove it. After that, continue by removing the bumper's retaining clips and unscrewing the bolts located under the wheel arches as shown in the video. Finally, begin to detach the bumper and disconnect the fog light wiring to fully remove it.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

Replacement of the front bumper grille of the Ford Ranger
Replacement of the front bumper grille of the Ford Ranger
Ford Ranger (2022-2026 / RA, P703) In this short guide we will see the instructions that will allow us to disassemble and replace the front bumper grille of the Ford Ranger. First, we …
Where is the fuse box located in the Ford Ranger?
Where is the fuse box located in the Ford Ranger?
Ford Ranger (1998-2011 / MK 3) To locate the fuses of your Ford Ranger, you need to read the following guide and follow the procedure described below. First of all, you need to rea…
Where is the fuse box of the Ford Ranger located?
Where is the fuse box of the Ford Ranger located?
Ford Ranger (1993-1997 / MK 2) To find the fuse box inside your Ford Ranger, you must follow the steps described in this new mini guide dedicated to you. First of all, you must ope…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos