Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on Ford Ranger

Model: Ford Ranger - Years 2006-2011
Part: Headlight

Lift the bonnet, secure it, and remove the plastic cover by unscrewing the screws. Then, pull the two levers now exposed, and as you will see, the headlamp will pop out. Disconnect the electrical connections. Once you have disconnected the main bulb connector, it will come out with the cable. Now, it's straightforward to unscrew the burnt-out bulb and screw in the new bulb. Reassemble the headlamp by inserting the new part and reconnecting the various connections, pushing the end piece until the plastic clips click into place. Replace the upper plastic cover, and you're done!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace a Headlight Bulb on a Ford Ranger
How to Replace a Headlight Bulb on a Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) If you need to replace a headlight bulb on this vehicle, possibly with an equivalent LED version, the following description contains all the necessar…
Removing the Interior Light Fitting on a Ford Ranger T6-T7
Removing the Interior Light Fitting on a Ford Ranger T6-T7
Ford Ranger (2015-2019 / ) In this video, we will see how to remove the interior light fittings and replace the bulbs on a Ford Ranger T6 and T7 in simple and quick steps. Firs…
How to replace the front headlight bulb of the Ford Ranger
How to replace the front headlight bulb of the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) In this new guide, we will help you replace the headlight bulb of your latest model Ford Ranger. First, purchase a new bulb that is perfectly compati…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos