Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear taillight bulb of the Ford Ranger

Model: Ford Ranger T6, P375, PX - Years 2011-2023
Part: Tail light bulb

Today we will explain how to replace the left rear headlight bulb on the Ford Ranger independently. Lower the tailgate and using a Phillips screwdriver, unscrew the two screws located on the outside of the headlight. Remove the rear headlight from its housing and disconnect the connector from the light fixture by rotating it counterclockwise. Press on the bulb to remove it and insert the new one; connect the connector to the light fixture and mount the headlight by securing it with the screws. After closing the tailgate, turn on the vehicle lights to test the reverse light bulb.

Posted on 27 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light on Ford Ranger
How to Replace the Rear Light on Ford Ranger
Ford Ranger (2015-2019 / ) Let's see how to replace the rear light on the Ford Ranger. To remove the light, unscrew the securing screws. Use a socket or screwdriver to unscrew …
How to replace the front headlight bulb of the Ford Ranger
How to replace the front headlight bulb of the Ford Ranger
Ford Ranger (1998-2011 / MK 3) To replace the front bulb of the Ford Ranger, we need to open the front hood and unscrew the nuts above the headlight, then proceed to remove the hea…
How to replace the turn signals on the external rearview mirror of the Ford Ranger
How to replace the turn signals on the external rearview mirror of the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) Today we will explain how to replace the turn signal bulb of the Ford Ranger T6 model. Press on the mirror to push it upwards in order to remove the …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos