Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on Ford Ranger

Model: Ford Ranger - Years 2015-2019
Part: Tail light

Let's see how to replace the rear light on the Ford Ranger. To remove the light, unscrew the securing screws. Use a socket or screwdriver to unscrew the securing nuts located at the side of the rear light. Once the light is free from any constraints, detach it from the bodywork by disconnecting the relevant power connectors. Replace any damaged bulbs with identical ones in size and voltage. Refit the light and reverse the assembly of the other parts. Test the light operation after reassembly.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear taillight bulb of the Ford Ranger
How to replace the rear taillight bulb of the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) Today we will explain how to replace the left rear headlight bulb on the Ford Ranger independently. Lower the tailgate and using a Phillips screwdriv…
How to remove the rear light of the Ford Ranger
How to remove the rear light of the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) Disassembling the rear light of a Ford Ranger is a fairly simple operation that can be done with a few tools. Here are the steps to follow: ### Tools…
Where Are the Fuses on a Ford Ranger?
Ford Ranger (1983-1992 / MK 1) The exact location of the fuses on a Ford Ranger is shown in the vehicle's owner's manual. However, since this model is quite old, it is likely that …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos