Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ranger
    4. : How do you replace the Ford Ranger battery?

Ford Ranger - Video tutorial

Model: Ford Ranger T6 - Years 2011-2023
Part: Battery
Operation: How do you replace the Ford Ranger battery?

To be able to replace the battery of the Ford Ranger you have to go and open the bonnet, so that you can access the components inside the engine compartment: the battery will in fact be on its right, in correspondence with the left front headlight. To be able to remove it from its housing it will be necessary to unscrew the fixing bolts and disconnect the power cables. Once the device has therefore been freed, it will be possible to extract it from its housing, so that it will be replaced with a new spare part. After the replacement it will be possible to connect and fix it properly.


Posted on 26 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos