Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Radio from a Ford Fusion?

Model: Ford Fusion North America MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Car stereo

See other generations:
Video tutorial

In this tutorial, you will see how to remove the radio from a Ford Fusion, a very simple and quick operation. First, make sure the key is not in the ignition.

Then, using a plastic trim tool to avoid leaving marks, pry off the outer trim of the center console. Next, remove the screws indicated with a 7mm socket wrench, take out the console itself, unscrew the additional screws, and extract the module from the housing.

At this point, just disconnect the various internal connectors and install the replacement if necessary.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

Ford Fusion North America (2013-2020 / MK 2) In this new guide of ours, we will explain how you can dismantle the factory radio in your second generation Ford Fusion on your own. First of all, e…
Ford Fusion North America (2006-2012 / MK 1) In this tutorial, you will see how to remove the SYNC module in the Ford Fusion, useful if you need to replace it. First, go to the rear seat. Then, …
Ford Fusion North America (2013-2020 / MK 2) These short and simple instructions will show us how to disassemble and replace the cabin fan of the Ford Fusion. First of all, we open the front pas…

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos