Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the stock radio from the Ford Fusion 2

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Car stereo

In this new guide of ours, we will explain how you can dismantle the factory radio in your second generation Ford Fusion on your own. First of all, enter the vehicle and make sure it is completely turned off, then proceed to remove the entire plastic panel from the center dashboard. Once you have done this, unscrew all the various screws holding the radio in place and then remove it by disconnecting the electrical cable connected to it at the back. At this point, the procedure is complete and you can proceed with the installation of a new radio if desired.

Posted on 7 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Ford Fusion North America (2006-2012 / MK 1) Changing the time displayed on the radio of your Ford Fusion is very simple. Just follow this procedure to complete the task in seconds. First, get i…
Ford Fusion North America (2013-2020 / MK 2) In this tutorial we can see how to dismantle the car radio in the Ford Fusion, an extremely simple and fast operation. First of all, make sure that t…
Ford Fusion North America (2006-2012 / MK 1) If you own a 2006 Ford Fusion and want to know where all the various fuses are located, just read this guide carefully and follow the described steps…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos