Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin fan of the Ford Fusion

Model: Ford Fusion North America MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Blower motor

See other generations:
Video tutorial

These short and simple instructions will show us how to disassemble and replace the cabin fan of the Ford Fusion. First of all, we open the front passenger door and start removing the plastic partition located under the glove compartment; then we unscrew the fixing screws of the starter motor, disconnecting the electrical wiring to remove the fan, as shown in the video.

At this point, we replace the fan with the new one, as well as with the original one, reassembling everything and checking its correct operation!


Posted on 20 June 2025 by ScegliAuto


Related tutorials

Replacing the Cabin Fan in a Ford Fusion
Replacing the Cabin Fan in a Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) Today's guide will help you remove and replace the cabin fan in a Ford Fusion. First, get inside the vehicle on the passenger side and locate the cab…
Where to Find the Fuse Box on a 2006 Ford Fusion
Where to Find the Fuse Box on a 2006 Ford Fusion
Ford Fusion North America (2006-2012 / MK 1) If you own a 2006 Ford Fusion and want to know where all the various fuses are located, just read this guide carefully and follow the described steps…
Where is the fuse box of the Ford Fusion located?
Where is the fuse box of the Ford Fusion located?
Ford Fusion North America (2006-2012 / MK 1) If you don't know where the fuse box is located inside the cabin of your first-generation Ford Fusion, don't worry because with the following guide y…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos