Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Fan in a Ford Fusion

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Blower motor

Today's guide will help you remove and replace the cabin fan in a Ford Fusion. First, get inside the vehicle on the passenger side and locate the cabin fan, which is situated low under the glove compartment; then, remove the mounting screws found on the sides and disconnect the electrical connector to take it out, as shown in the video. At this point, install the new original cabin fan, reconnect it, and check its operation; then secure the cabin fan with its original screws.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the cabin fan of the Ford Fusion
Replacement of the cabin fan of the Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) These short and simple instructions will show us how to disassemble and replace the cabin fan of the Ford Fusion. First of all, we open the front pas…
Where to Find the Fuse Box on a 2006 Ford Fusion
Where to Find the Fuse Box on a 2006 Ford Fusion
Ford Fusion North America (2006-2012 / MK 1) If you own a 2006 Ford Fusion and want to know where all the various fuses are located, just read this guide carefully and follow the described steps…
Where is the fuse box of the Ford Fusion located?
Where is the fuse box of the Ford Fusion located?
Ford Fusion North America (2006-2012 / MK 1) If you don't know where the fuse box is located inside the cabin of your first-generation Ford Fusion, don't worry because with the following guide y…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos