Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin filter of the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Cabin air filter

To prevent dust and dirt from entering the ventilation system of the Ford Fiesta, a filter has been placed on the intake, which we must periodically replace. To do this, we go to the passenger side, unscrew the screw that secures the panel at the end of the central tunnel, once removed we will have access to the cover of the filter box. We unscrew the five Torx screws that hold it in place, remove the old filter element and insert the new one, paying attention to the correct positioning. We put the cover back on and secure it with its screws, reattach the panel and fix it in place.

Posted on 30 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Pollen Filter
Replacing the Pollen Filter
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) The pollen filter on the Ford Fiesta is located low down, on the right side in front of the passenger. To access the work area more easily, it is adv…
How to replace the cabin air filter of the 2017 Ford Fiesta
How to replace the cabin air filter of the 2017 Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) If you are planning to replace the cabin air filter in your 2017 Ford Fiesta on your own, then all you have to do is follow the following procedure. …
Procedure to Replace the Cabin Filter on a Ford Fiesta
Procedure to Replace the Cabin Filter on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, you can see how to remove the cabin filter on a Ford Fiesta. To perform this cabin filter replacement, you need to remove the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos