Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Lock Actuator of a Ford Fiesta

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Door lock

See other generations:
Video tutorial

Today's instructions will show you how to dismantle and replace the lock actuator of the front door of the Ford Fiesta. First, open the front door and start removing the door panel by unscrewing the fixing screws; once removed, disconnect the lock from the inside by unscrewing the side screws of the lock actuator with a Torx key, as shown in the video.

At this point, disconnect the electrical connector to remove and replace the lock actuator, following the video tutorial to the end!


Updated on 22 October 2026 by ScegliAuto


Related tutorials

Replacing the Rear Boot Solenoid on a Ford Fiesta Mk6
Replacing the Rear Boot Solenoid on a Ford Fiesta Mk6
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this video tutorial, you will see how to remove and replace the solenoid or actuator for the rear boot lock on a sixth series Ford Fiesta. First, …
Replacing the Actuator in a Ford Fiesta
Replacing the Actuator in a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) If you need to replace the actuator for Ford Fiestas produced over the last ten years, from 2008 to 2018, you will first need to purchase the replace…
How to Remove the Door Lock of a Ford Fiesta
How to Remove the Door Lock of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Before starting, open the door of your Ford Fiesta. First, unclip and remove the side cover of the screw that secures the handle and the lock to the …

    Frequently Asked Questions

    • Fiesta 2017-2023 - How much does it cost to replace a Ford Fiesta lock? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos