Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Boot Solenoid on a Ford Fiesta Mk6

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Door lock

See other generations:
Video tutorial

In this video tutorial, you will see how to remove and replace the solenoid or actuator for the rear boot lock on a sixth series Ford Fiesta. First, open the boot and remove the boot panel by unclipping it from the rear clips; then unscrew the screws securing the plastic cover to access the lock mechanism, as shown in the video.

At this point, unscrew the screws of the mechanism and actuator and disconnect the opening cable; all that’s left is to remove the actuator and replace it with the new one!


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Boot Release Solenoid on a Ford Fiesta
How to Remove and Replace the Boot Release Solenoid on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) This video will show you how to remove and replace the solenoid for the electronic boot release on a Ford Fiesta. This operation takes just a few min…
How to Remove the Boot Tailgate of the Ford Fiesta
How to Remove the Boot Tailgate of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Today, you will see the instructions to remove and detach the boot tailgate of the Ford Fiesta. First, open the boot lid and start disconnecting the …
How to Remove the Rear Bumper of a Ford Fiesta
How to Remove the Rear Bumper of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Before you can start, open the boot of your Ford Fiesta. Begin by unscrewing and removing the fastening bolts located in the rear wheel arches. Next,…

    Frequently Asked Questions

    • Fiesta 2017-2023 - How much does it cost to replace a Ford Fiesta lock? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos