Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to fix the air conditioning problem on the Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Air conditioning

See other generations:
Video tutorial

Today, let's look at one of the most common faults in the air conditioning system of the Ford Focus, following the instructions below. The issue involves the compressor not turning on, and consequently, the entire air conditioning system; often, the problem is related to the relay located inside the fuse box in the engine compartment, as shown in the video.

At this point, remove and replace the air conditioning relay, installing the original one; check the operation of the air conditioning, and finally, refit the cover of the fuse box!


Updated on 25 October 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Climate Control Switches on the Ford Focus
Guide to Replacing the Climate Control Switches on the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) These brief and simple steps will show you how to dismantle and replace the climate control switches on the Ford Focus. First, get inside the vehicle…
How to reset the battery monitoring system in the Ford Focus?
How to reset the battery monitoring system in the Ford Focus?
Ford Focus (2011-2018 / MK 3) In this tutorial we can see how to reset the battery monitoring system in the Ford Focus, a very simple and quick operation, to be carried out for ex…
How to Fix High RPMs and Unstable Idle on the Ford Focus 1.6 MK1
Ford Focus (1998-2004 / MK 1) In this video tutorial, identify the cause of the malfunction of the idle actuator, which allows you to lower the idle appropriately and keep the eng…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos