Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the AdBlue tank of the Ford Ranger Wildtrak?

Model: Ford Ranger T6, P375, PX - Years 2011-2023
Part: Checks and maintenance

The Ford Ranger Wildtrak uses, in its recently built diesel engines, the pollution control additive adblue, as required by law. The tank of the adblue, as well as the visible filling cap in the video, is installed next to the diesel tank, in the rear of the vehicle, so in case there is a need to remove it, preferring to do it yourself, you must lift the vehicle, disconnect the input and output tubes of the aforementioned additive, disconnect the electrical connectors, and finally remove the fixing pins. Once freed, it can be removed from its seat.

Posted on 27 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the AdBlue warning light of the Ford Ranger?
How do you reset the AdBlue warning light of the Ford Ranger?
Ford Ranger (2011-2023 / T6, P375, PX) To reset the AdBlue light on the Ford Ranger, you need to refill by inserting the necessary amount of additional fluid into the corresponding tank: t…
How to top up AdBlue and reset the warning light on the Ford Ranger
How to top up AdBlue and reset the warning light on the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) In this guide we will see the main information on how to top up the AdBlue liquid and how to reset the warning light on the Ford Ranger. When the AdB…
How to reset the AdBlue warning light on a Ford Ranger?
How to reset the AdBlue warning light on a Ford Ranger?
Ford Ranger (2011-2023 / T6, P375, PX) To reset the AdBlue warning light on a Ford Ranger, you need to top up the tank by adding the necessary amount of additive liquid: this can be found …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos