Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to top up the coolant in the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Antifreeze coolant

In this tutorial, we can see how to top up the coolant in the Ford Focus, an extremely simple and quick operation to be carried out periodically. First of all, make sure that the engine is cool enough, then open the hood, locate the expansion tank on the passenger side and unscrew the cap. Then insert a funnel into the hole and pour in the necessary amount of liquid to reach the ideal level, indicated on the side wall of the tank itself. Finally, tighten the cap, run the engine for a few minutes and check that the level is still ideal.

Posted on 4 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the coolant in the Ford Focus?
How to replace the coolant in the Ford Focus?
Ford Focus (2011-2018 / MK 3) In this tutorial we can see how to replace the coolant in the Ford Focus, an extremely simple and quick operation. First of all, we wait for the engi…
Where is the coolant temperature sensor located in the Ford Focus?
Where is the coolant temperature sensor located in the Ford Focus?
Ford Focus (2011-2018 / MK 3) In this video we can see where the coolant temperature sensor is located in the Ford Focus and how to proceed in case we need to replace it. As shown…
Topping Up the Radiator Reservoir on Ford Focus
Ford Focus (2011-2018 / MK 3) Top up the radiator reservoir of the Ford Focus with the specified coolant. Here's how. Pull the plastic lever located at the bottom left of the dash…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos