Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Coolant in a Ford Focus?

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Antifreeze coolant

In this tutorial, you will learn how to top up the coolant in the Ford Focus MK2. First, ensure the engine is off for a few minutes, as any spills of hot liquid can be very dangerous to your health. Once this condition is met, open the bonnet and unscrew the large cap on the reservoir located to your left. Next, top up the coolant until it reaches a level between the minimum and maximum marks, using a fluid suitable for your average operating temperatures. Finally, securely tighten the cap.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to top up the coolant in the Ford Focus?
How to top up the coolant in the Ford Focus?
Ford Focus (2011-2018 / MK 3) In this tutorial, we can see how to top up the coolant in the Ford Focus, an extremely simple and quick operation to be carried out periodically. Fir…
Replacing the Coolant Temperature Sensor of the Ford Focus 2.0L
Replacing the Coolant Temperature Sensor of the Ford Focus 2.0L
Ford Focus (2011-2018 / MK 3) Below are the main instructions to remove and replace the coolant temperature sensor of the Ford Focus 2.0L engine. First, open the bonnet of the veh…
How to replace the coolant in the Ford Focus?
How to replace the coolant in the Ford Focus?
Ford Focus (2011-2018 / MK 3) In this tutorial we can see how to replace the coolant in the Ford Focus, an extremely simple and quick operation. First of all, we wait for the engi…

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos