Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Coolant Temperature Sensor of the Ford Focus 2.0L

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine coolant temperature sensor

See other generations:
Video tutorial

Below are the main instructions to remove and replace the coolant temperature sensor of the Ford Focus 2.0L engine. First, open the bonnet of the vehicle and locate the sensor; you will need to remove the air filter box to access it by disconnecting the intake hose.

Next, disconnect the electrical connector of the sensor and unclip it; remove and replace the coolant temperature sensor with the new one, installing the original replacement.


Posted on 7 May 2026 by ScegliAuto


Related tutorials

Where is the coolant temperature sensor located in the Ford Focus?
Where is the coolant temperature sensor located in the Ford Focus?
Ford Focus (2011-2018 / MK 3) This video shows where the coolant temperature sensor is located in the Ford Focus and how to proceed if you need to replace it. As shown, the sensor…
How to Replace the Temperature Sensor on a Ford Focus
How to Replace the Temperature Sensor on a Ford Focus
Ford Focus (1998-2004 / MK 1) To replace the temperature sensor on a Ford Focus, start by removing the 3 spark plugs. Use a screwdriver to remove the top cap from the sensor, disc…
Replacing the External Temperature Sensor on the Ford Focus
Replacing the External Temperature Sensor on the Ford Focus
Ford Focus (2011-2018 / MK 3) In this video tutorial, we will go through the steps to remove and replace the external temperature sensor on the Ford Focus. First, locate the tempe…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos